International Conference on Battery and Fuel Cell Technology December 08-09, 2016 Dubai, UAE

ConferenceSeries cordially invites you to attend the International Conference on Battery and Fuel Cell Technology during December 8-9, 2016 at Dubai, UAE.

The main theme of the conference is “To Share the Latest Leading-Edge Discoveries and Emphasize Current Challenges in Battery and Fuel Cell Technology”.

Battery Tech 2016 is the platform to discuss and learn how the technology in Batteries and fuel cells had been established globally in recent years. This conference mainly focuses to gather all the market performers and professionals of its kind under the same roof at the same time; it offers an effective platform to develop this fast growing market and to accentuate the challenges in these electrochemical power sources.

Dubai is a place for wide-scope of research in the technologies of batteries and fuel cells. AFC Energy and Dubai Carbon have announced the signing of an MOU to assess the potential for an estimated 300 megawatts of hydrogen fuel cell generation capacity in Dubai by 2020. Being a host of world expo 2020, Dubai is researching and developing new technologies in battery technology to utilize the power of a battery efficiently.

Track 1: General Aspects of Battery:

Battery is a device consisting of one or more electrochemical cells with external connections connected to energize the electrical devices. A battery has a cathode, and an anode. The name "battery" commonly denoted to a device composed of multiple cells, yet the procedure has advanced to additionally include devices consisting of a single cell. Batteries are categorized into primary and secondary types. Primary batteries such as alkaline battery, leclanché cell, lithium battery are irreversibly transforming chemical energy to electrical energy. When the power inside the reactants got exhausted, these batteries such as primary does not restore energy easily. Secondary batteries such as flow battery, fuel cell, lead acid battery etc. can be recharged; that is, they can reverse their chemical reactions by supplying electrical energy to the battery, by restoring their original composition.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences.

Conference on Material Science Engineering, June 13-15, 2016 Alicante, Spain; Electrical Engineering Conference, August 08-09, 2016, Las Vegas, Nevada, USA, 2nd International Conference on Automobile Engineering, September 05-06, 2016 Frankfurt, Germany,  Power and Energy Engineering Conference September 29-30, 2016 London, UK, Advanced Automotive Battery Conferences, June  14-17, 2016, Detroit, Michigan, USA, Gordon Research Conference, February21-26, 2016, California, International Battery Seminar & Exhibit, March 21-23, 2016, Florida, Battery Power 2016, August 3-4, Denver, USA,      18^th International Meeting on Lithium Batteries, June 19-24, 2016, Chicago, USA, Battery Vehicle Society BVS, Battery Council International BCI, India Lead Zinc Development Association, Canadian Battery Association, Energy Storage Association, British and Irish Portable Battery Association.

Track 2: Primary Cell Batteries:

Primary batteries, or primary cells, generate power when they are connected immediately. Primary cells are mostly or commonly used in movable devices that have low current drain, are used only periodically, or are used well away from an different power source, such as in alarm and communication circuits where other electricity is periodically obtainable. Disposable primary cells cannot be constantly recharged, since the chemical reactions are not easily reversible and the materials which are active cannot return to their original forms. The manufactures of Battery mention against trying to recharge primary cells. In general, these have higher energy densities than rechargeable batteries, but disposable batteries doesn’t perform well under high-drain applications with loads under 75 ohms (75 Ω). Common types of disposable batteries include zinc–carbon batteries and alkaline batteries.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

Conference on Biometrics, October 20-21, 2016 Houston, Texas, USA; Conference on Production Engineering, July 25-26, 2016 Berlin, Germany; Renewable Energy Conference, July 28-30, 2016 Berlin, Germany;  International Conference on Industrial Chemistry June 27-28, 2016 New Orleans, Louisiana, USA; Battcon 2016 Stationary Battery Conference, May 10-12, 2016,Boca Raton, Florida , USA; 6th Annual Next-Generation Energy Storage, April 18-20, 2016; Batterietagung 2016, April 26-27, 2016, Munster, Germany; Beyond Lithium Ion Symposium, May 24-26, 2016, Richland, Washington, USA; 2016 China (Guangzhou) International Charging Equipment and Battery Exhibition, November 18-22, Guangzhou, China, Danish Battery Society, PRBA, The Rechargeable Battery association, Battery Vehicle Society BVS, Canadian Battery Association.

Battery Council International (BCI)

Track 3: Secondary Cells Batteries:

Secondary batteries, also known as secondary cells, or rechargeable batteries, must be charged before first use; they are usually assembled with active materials in the discharged state. Rechargeable batteries are (re)charged by applying electric current, which reverses the chemical reactions that occur during discharge/use. Devices to supply the appropriate current are called chargers. The oldest form of rechargeable battery is the lead–acid battery. This technology contains liquid electrolyte in an unsealed container, requiring that the battery be kept upright and the area be well ventilated to ensure safe dispersal of the hydrogen gas it produces during overcharging. The lead–acid battery is relatively heavy for the amount of electrical energy it can supply. Its low manufacturing cost and its high surge current levels make it common where its capacity (over approximately 10 Ah) is more important than weight and handling issues.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences.

Mechanical Engineering Conference October 03-04, 2016 Orlando, Florida, USA; Renewable Energy Conference, July 28-30, 2016 Berlin, Germany;  Power Engineering Conference, September 29-30, 2016 London, UK, Lithium Battery Power 2016, November 1-2, 2016 Bethesda, Maryland, USA; Next Generation 2016 Energy Foundation, April 18-20, 2016, San Diego, California; Batteries 2016, September 28-30, 2016, Nice, France; Battery Congress May 17-18, 2016, Troy, Michigan; 2016; Annual Meeting & Conference of NAATBatt International March 1-3, 2016 California, USA, Danish Battery Society, PRBA The Rechargeable Battery association, Battery Association of Japan BAJ, Battery Vehicle Society BVS, Canadian Battery Association.

Track 4: Design and Technology of Batteries:

The internal function of a battery are typically contained within a metal or plastic case. Under this metal there is a cathode, which connects to the positive terminal, and an anode, which connects to the negative terminal. These constituents, more generally known as electrodes, occupy most of the space in a battery and are placed where the chemical reactions occur. A partition creates a barrier between the cathode and anode, preventing the electrodes from moving while allowing electrical charge to flow freely between them. The medium that allows the electric charge to flow between the cathode and anode is known as the electrolyte. Finally, the collector conducts the charge to the outside of the battery and through the load.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

2^nd International Conference on Smart Materials & Structures, February 29- March 02, 2016, Pennsylvania, USA; Electrical Engineering Conference, November 03-05, 2015 Valencia, Spain;  4th International Conference on Bioelectronics, September 28-30, 2015, Atlanta, USA; 5th Euro Biosensors Conference June 30-July 02, 2016,  Valencia-Spain; Oil & Gas battery conference & exhibition August 23-25, 2016, Oslo, Norway; IBA 2016 Meeting March 20-2, 2016, Nantes, France, Battery Vehicle Society BVS, Battery Council International BCI, India Lead Zinc Development Association, Canadian Battery Association, Energy Storage Association, British and Irish Portable Battery Association.

Track 5: Operation Problems in Batteries:

As batteries are widely used it has lots of various problems. In lithium batteries the failures are depends on over-voltage, state of Charge, temperature effects if the charging voltage is increased beyond the recommended upper cell voltage, typically 4.2 Volts, excessive current flows giving rise to two problems such as lithium plating, overheating. Temperature effects both in low temperature operation and high temperature operation and also thermal runaway.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

Mechanical Engineering Conference October 03-04, 2016 Orlando, Florida, USA; Renewable Energy Conference July 28-30, 2016 Berlin, Germany;  Power Engineering Conference, September 29-30, 2016 London, UK, Lithium Battery Power 2016, November 1-2, 2016 Bethesda, Maryland, USA; Next Generation 2016 Energy Foundation, April 18-20, 2016, San Diego, California; Batteries 2016, September 28-30, 2016, Nice, France; Battery Congress May 17-18, 2016, Troy, Michigan; 2016; Annual Meeting & Conference of NAATBatt International March 1-3, 2016 California, USA, Danish Battery Society, PRBA The Rechargeable Battery association, Battery Association of Japan BAJ, Battery Vehicle Society BVS, Canadian Battery Association.

Track 6: Applications of Batteries:

Presenting large batteries for stationary applications, e.g. energy storage, and also batteries for hybrid vehicles or different tools. Secondary Battery such as Lithium batteries are used in various types of mobile devices, including communication equipment, computers, entertainment devices, power tools, toys, games, lighting and medical devices. Mostly in transportation the lithium secondary batteries stimulated to reduce carbon emissions in the Kyoto Protocol and demand for eco-friendly vehicles through CARB(California Air Resource Board). The Toyota Prius was the first commercial HEV. This vehicle uses NIMH batteries for power sources and presents a solution to the problem of high power density.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

Power Engineering Conference September 29-30, 2016 London, UK; Renewable Energy Conference, July 28-30, 2016 Berlin, Germany; Lithium Battery Power 2016, November 1-2, 2016 Bethesda, Maryland, USA; Mechanical Engineering Conference, October 03-04, 2016 Orlando, Florida, USA; Battery Congress May 17-18, 2016, Troy, Michigan; 2016; Annual Meeting & Conference of NAATBatt International March 1-3, 2016 California, USA ;Next Generation 2016 Energy Foundation, April 18-20, 2016, San Diego, California; Batteries 2016, September 28-30, 2016, Nice, France, Battery Vehicle Society BVS, Battery Council International BCI, India Lead Zinc Development Association, Canadian Battery Association, Energy Storage Association, British and Irish Portable Battery Association.

Track 7: Latest Developments of Batteries:

New Developments in Battery Technology such as Electric cars discusses the use of batteries as motive power sources in electric vehicles, as well as temporary energy storage in hybrid and solar powered vehicles. Lithium-Metal-Polymer battery contains no liquid or paste electrolyte. The electrolyte is in the form of a polymer film, resulting in a lightweight battery that is rugged, required little maintenance, and can tolerate extremes of temperatures in service lives as long as 10 years. A new development offered by Proctor & Gamble, not yet on the market. It is low-power electrolysis technology that can remove pathogens from small or large quantities of water. The technology is offered for licensing through yet2.com as a TechPak and even more.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences.

6th International Conference on Conference on Material Science Engineering, September 12-14, 2016 Atlanta, Georgia, USA; Electrical Engineering Conference, August 08-09, 2016 Las Vegas, Nevada, USA, Conference on Material Science Engineering, June 13-15, 2016 Alicante, Spain;   Power Engineering Conference September 29-30, 2016 London, UK, 2nd International Conference on Automobile Engineering, September 05-06, 2016 Frankfurt, Germany; Advanced Automotive Battery Conferences, June  14-17, 2016, 18^th International Meeting on Lithium Batteries, June 19-24, 2016, Chicago, USA; Detroit, Michigan, USA, Gordon Research Conference, February21-26, 2016, California, International Battery Seminar & Exhibit, March 21-23, 2016, Florida, Battery Power 2016, August 3-4, Denver, USA, Danish Battery Society, PRBA The Rechargeable Battery association, Battery Association of Japan BAJ, Battery Vehicle Society BVS, Canadian Battery Association.

Track 8: Batteries in Renewable Sources and Grid Balancing:

Nickel Metal Hydride (NiMH) batteries have been in use for many years in consumer and automotive applications due to their superior energy density and environmentally friendly attributes. The demand for Sodium Sulphur batteries as an effective means of stabilizing renewable energy output and providing ancillary services is expanding. U.S. utilities have deployed 9 MW for peak shaving, backup power, firming wind capacity, and other applications. Grid storage is probably the battery industry’s toughest challenge yet. More often it seems that in many projects happening now, energy storage systems are expected to do not one, but often several things. It’s partly the result of how the electricity grids are regulated, where storage is too expensive to be solely a generation or a distribution asset, so its value is extracted by measuring out a multiplicity of different services and functions, over the system’s lifetime.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

Renewable Energy Conference, July 28-30, 2016 Berlin, Germany;  Power Engineering Conference, September 29-30, 2016 London, UK; Mechanical Engineering Conference, October 03-04, 2016 Orlando, Florida, USA; Annual Meeting & Conference of NAATBatt International March 1-3, 2016 California, USA. Next Generation 2016 Energy Foundation, April 18-20, 2016, Lithium Battery Power 2016, November 1-2, 2016 Bethesda, Maryland, USA San Diego, California; Batteries 2016, September 28-30, 2016, Nice, France; Battery Congress May 17-18, 2016, Troy, Michigan; 2016, Danish Battery Society, PRBA The Rechargeable Battery association, Battery Association of Japan BAJ, Battery Vehicle Society BVS, Canadian Battery Association.

Track 9: Nanotechnology in Advance Batteries:

Nano batteries are fabricated batteries employing technology at the Nano scale, a scale of microscopic particles that amount less than 100 nanometres or 10−7 meters. In contrast, out-dated Li-Ion technology uses active materials, such as cobalt-oxide, with atoms or particles that range in size between 5 and 20 micrometres (5000 and 20000 nanometres - over 100 times Nano scale). It is hoped that Nano-engineering will improve many of the inadequacies of present battery technology, such as recharging time and battery 'memory'. Several companies are exploring and emerging these technologies. In March 2005, Toshiba announced that they had a new Lithium-Ion battery consists a  nanostructured lattice at the positive and negative terminals that permits the battery to recharge a astonishing eighty times quicker than previously. Prototype models were able to charge to eighty per cent capacity in one minute, and were one hundred per cent recharged after 10 minutes.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

Conference on Production Engineering, July 25-26, 2016 Berlin, Germany; Conference on Biostatistics, October 20-21, 2016 Houston, Texas, USA; International Conference on Industrial Chemistry June 27-28, 2016 New Orleans, Louisiana, USA; Conference on Renewable Energy, July 28-30, 2016 Berlin, Germany; 2016 China (Guangzhou) International Charging Equipment and Battery Exhibition, November 18-22, Guangzhou, China.6th Annual Next-Generation Energy Storage, April 18-20, 2016; Batterietagung 2016, April 26-27, 2016, Munster, Germany; Beyond Lithium Ion Symposium, May 24-26, 2016, Richland, Washington, USA; Battcon 2016 Stationary Battery Conference, May 10-12, 2016,Boca Raton, Florida , USA, Battery Vehicle Society BVS, Battery Council International BCI, India Lead Zinc Development Association, Canadian Battery Association, Energy Storage Association, British and Irish Portable Battery Association.

Track 10: Global Outlook of Fuel Cell:

A fuel cell main function is to  that transforms the chemical energy from a fuel into power through a chemical reaction of positively charged hydrogen ions with oxygen or alternative oxidizing agent. Fuel cells are dissimilar from batteries in that they require a constant source of fuel and oxygen or air to withstand the chemical reaction, while in a battery the chemicals existing in the battery react with each other to produce an electromotive force. Fuel cells can generate electrical energy continuously for as long as these inputs are delivered. Fuel cells come in multiple types; however, they all work in the same common way. They are made up of three contiguous divisions: the anode, the electrolyte, and the cathode. Two chemical reactions occur at the boundaries of the three unlike divisions. The net outcome of the two reactions is that fuel is disbursed, water or carbon dioxide is produced, and an electric current is generated, which can be used to power electrical devices, normally referred to as the load.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

Mechanical Engineering Conference October 03-04, 2016 Orlando, Florida, USA; 6th International Conference on Materials Science Engineering September 12-14, 2016 Atlanta, Georgia, USA; Conference on Material Science Engineering, June 13-15, 2016 Alicante, Spain; International Conference on Physics June 27-29, 2016 New Orleans, Louisiana, USA; Fuel Cells for Stationary Power Applications February 9 2016, London; Second International Workshop Durability and Degradation Issues in PEM Electrolysis Cells and its Components February 16-17, 2016, Freiburg, Germany; Energy Storage Conference 2016, 3-4 february, Paris, France; Workshop - Perspectives on Power-to-Liquids and Power-to-Chemicals February 17-18, 2016 Freiburg, Germany, Fuel Cell and Hydrogen Energy Association (FCHEA), UK Hydrogen and Fuel Cell Association UKHFCA, Canadian hydrogen and fuel cell association, Scottish Hydrogen and Fuel Cell Association, European Hydrogen and Fuel Cell Association.

Track 11: Classifications of Fuel Cell:

Fuel cells are categorized mainly by the kind of electrolyte they employ. This classification determines the kind of electro-chemical reactions that take place in the cell, the kind of catalysts required, the temperature range in which the cell operates, the fuel required, and other factors. These characteristics, in turn, affect the applications for which these cells are most suitable. There are several types of fuel cells currently under development, each with its own advantages, limitations, and potential applications. The following types of fuel cells are Polymer electrolyte membrane fuel cells, direct methanol fuel cells, alkaline fuel cells, Phosphoric acid fuel cells, Molten carbonate fuel cells, Solid oxide fuel cells, Reversible fuel cells.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

Conference on Biostatistics, October 20-21, 2016 Houston, Texas, USA; Conference on Production Engineering, July 25-26, 2016 Berlin, Germany; Renewable Energy Conference, July 28-30, 2016 Berlin, Germany;  International Conference on Industrial Chemistry June 27-28, 2016 New Orleans, Louisiana, USA; 4th FC International Meeting February 29, 2016, Tokyo; Energy Innovation Summit February 29- March 2, 2016, Washington D.C, USA; 13^th International Hydrogen &  Fuel Cell Expo FC Expo 2017March 1 -3, 2017, Tokyo, Japan; 12th International Hydrogen & Fuel Cell Conference: The Commercialisation of Hydrogen & Fuel Cell Technology 15 March 2016 NEC, Birmingham (UK), Fuel Cell and Hydrogen Energy Association (FCHEA), UK Hydrogen and Fuel Cell Association UKHFCA, Canadian hydrogen and fuel cell association, Scottish Hydrogen and Fuel Cell Association, European Hydrogen and Fuel Cell Association.

Track 12: Applications of Fuel cells:

Fuel Cell at present outlines fuel cells for transportation as any units that deliver propulsive electricity to a vehicle, directly or indirectly. Forklift trucks and other goods control vehicles such as airport luggage automobiles, Two- and three-wheeler automobiles such as scooters, light duty vehicles. Portable fuel cells as those which are made into products that are designed to be moved. These include military applications Auxiliary Power Units for the leisure and trucking industries, portable products  such as torches, vine trimmers, small personal electronics such as mp3 players, cameras etc, large personal electronics namely laptops, printers, radios, education kits and toys.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

2^nd International Conference on Smart Materials & Structures, February 29- March 02, 2016, Pennsylvania, USA; Electrical Engineering Conference, November 03-05, 2015 Valencia, Spain, International Renewable Energy Storage Conference, IRES 2016, 15-17 March 2016 Dusseldorf Germany; Fuel Cells Science and Technology 2016 - A Grove Fuel Cell Event 13-14 April 2016, Glasgow, Scotland UK; Ibero-American Conference on Hydrogen & Fuel Cells 2016, Iberconappice 2016, 20-22 April 2016 Torremolinos, Spain; Group Exhibit Hydrogen + Fuel Cells + Batteries, within Hannover Messe 2016, 25-29 April 2016 Hannover, Germany;  Fuel Cell and Hydrogen Energy Association (FCHEA), UK Hydrogen and Fuel Cell Association UKHFCA, Canadian hydrogen and fuel cell association, Scottish Hydrogen and Fuel Cell Association, European Hydrogen and Fuel Cell Association.

Track 13: Recent Advancements in Fuel Cell Technology:

Fuel Cell Technology has been at its epitome in the advancements mainly regarding hydrogen fuel cells have been a dream energy source, merging the large quantity of hydrogen as an element with the clean alteration of it to and from a source of stored energy. Advanced resources based hydrogen storage technologies and abridged cost of advanced compacted hydrogen storage systems. Hydrogen fuel cells for vehicles create an fascinating contender to pure electric vehicles (fuel cells create electricity, so many components of the vehicle are similar).

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

6th International Conference on Materials Science Engineering September 12-14, 2016 Atlanta, Georgia, USA; Mechanical Engineering Conference, October 03-04, 2016 Orlando, Florida, USA; International Conference on Physics June 27-29, 2016 New Orleans, Louisiana, USA; Conference on Material Science Engineering, June 13-15, 2016 Alicante, Spain; Fuel Cells for Stationary Power Applications February 9 2016, London; Second International Workshop Durability and Degradation Issues in PEM Electrolysis Cells and its Components February 16-17, 2016, Freiburg, Germany; Energy Storage Conference 2016, 3-4 february, Paris, France; Workshop - Perspectives on Power-to-Liquids and Power-to-Chemicals February 17-18, 2016 Freiburg, Germany, Fuel Cell and Hydrogen Energy Association (FCHEA), UK Hydrogen and Fuel Cell Association UKHFCA, Canadian hydrogen and fuel cell association, Scottish Hydrogen and Fuel Cell Association, European Hydrogen and Fuel Cell Association.

Track 14: Supercapacitors vs Batteries:

A super capacitor (SC) (sometimes ultra capacitor, formerly electric double-layer capacitor (EDLC)) is a high-capacity electrochemical capacitor with capacitance values very much higher than different capacitors (but lower voltage limits) that bridge the gap amongst electrolytic capacitors and rechargeable batteries. They typically store 10 to 100 times more energy per unit volume or mass than electrolytic capacitors, can accept and deliver charge much faster than batteries, and tolerate many more charge and discharge cycles than rechargeable batteries. They are however 10 times larger than conventional batteries for a given charge.

Super capacitors are used in applications requiring many rapid charge/discharge cycles rather than long term compact energy storage: within cars, buses, trains, cranes and elevators, where they are used for regenerative braking, short-term energy storage or burst-mode power delivery. Smaller units are used as memory backup for static random-access memory (SRAM).

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences

2^nd International Conference on Smart Materials & Structures, February 29- March 02, 2016, Pennsylvania, USA; Electrical Engineering Conference, November 03-05, 2015 Valencia, Spain;  4th International Conference on Bioelectronics, September 28-30, 2015, Atlanta, USA; 5th Euro Biosensors Conference June 30-July 02, 2016,  Valencia-Spain; Oil & Gas battery conference & exhibition August 23-25, 2016, Oslo, Norway; IBA 2016 Meeting March 20-2, 2016, Nantes, France, Battery Vehicle Society BVS, Battery Council International BCI, India Lead Zinc Development Association, Canadian Battery Association, Energy Storage Association, British and Irish Portable Battery Association.

Track 15: Various Energy Materials:

Research into hydride materials for energy applications typically focuses on enhancing gravimetric storage density and ion transport of the materials. However, the requirements for stationary applications such as fuel cells can be significantly different and amenable to a broader class of potential materials. Multiple geophysical and social pressures are forcing a shift from fossil fuels to renewable and sustainable energy sources. To effect this change, we must create the materials that will support emergent energy technologies. Solar energy is the utmost priority to develop photovoltaic cells that are efficient and cost effective. Department of Materials Science and Engineering, Stanford University, conducting extensive research on Photovoltaic, Energy storage and Hydrogen storage to meet global Energy requirements. The global market value of components for PEM fuel cell membrane electrode assembly (MEA) as BCC report is estimated $383 million in 2010. This market is expected to grow at a 20.6% compound annual growth rate (CAGR) over the 5-year forecast period to reach $977 million in 2015.

Related conferences: 6th International Conference on Conference on Material Science Engineering, September 12-14, 2016 Atlanta, Georgia, USA; Electrical Engineering Conference, August 08-09, 2016 Las Vegas, Nevada, USA, Conference on Material Science Engineering, June 13-15, 2016 Alicante, Spain;   Power Engineering Conference September 29-30, 2016 London, UK, 2nd International Conference on Automobile Engineering, September 05-06, 2016 Frankfurt, Germany; Advanced Automotive Battery Conferences, June  14-17, 2016, 18^th International Meeting on Lithium Batteries, June 19-24, 2016, Chicago, USA; Detroit, Michigan, USA, Gordon Research Conference, February21-26, 2016, California, International Battery Seminar & Exhibit, March 21-23, 2016, Florida, Battery Power 2016, August 3-4, Denver, USA, Danish Battery Society, PRBA The Rechargeable Battery association, Battery Association of Japan BAJ, Battery Vehicle Society BVS, Canadian Battery Association.

Recommended Battery conferences | Lithium battery conferences  | Battery and Fuel Cell Technology Conferences